Home › Services › Compressor & PCB Repair

Compressor & PCB Repair · Ulwe, Navi Mumbai

AC Compressor & PCB Repair in Ulwe, Navi Mumbai

An AC with no display, error codes or a humming compressor isn’t always a lost cause. We test the PCB and compressor properly and repair at component level where possible, so you don’t pay for parts you don’t need.

Starting from ₹1,500

Book a Technician

Quick reply on WhatsApp · Open 24x7

Or call +91 91370 12430

Compressor & PCB Repair

Compressor & PCB Repair by trained technicians in Ulwe

We repair inverter AC PCBs at chip level from ₹1,500, replace capacitors and relays from ₹699, and replace compressors with labour, vacuuming and gas charging starting at ₹6,500. The compressor itself is charged separately because its price depends on the brand and capacity.

Inverter ACs are controlled by a printed circuit board (PCB). Power cuts, voltage spikes and moisture, all common in Navi Mumbai, can damage components on the board. A new PCB from the company can be expensive and sometimes out of stock. In many cases we can repair the faulty components on the existing board instead.

A compressor that hums but won’t start is often a weak capacitor or relay, not a dead compressor. We test the capacitor, windings and current draw before suggesting a replacement, and we always tell you whether a repair makes financial sense on your AC.

What's included

When to call us

Signs you need Compressor & PCB Repair

Error codes

Error codes on the display usually point to a sensor, PCB or communication fault.

AC dead / no display

No display and no response at all often means a power supply or PCB problem.

Compressor humming, not starting

A compressor that hums but doesn't start is often a capacitor, not the compressor itself.

Burning smell

A burning smell means switch off immediately. It can be a wiring, PCB or motor fault.

Pricing

Compressor & PCB Repair prices in Navi Mumbai

Starting rates. Your technician confirms the final price after inspection, before any work begins.

PCB Repair

₹1,500

Chip-level, most inverter boards

Most booked

Capacitor / Relay

₹699

Including standard part

Compressor Replacement

₹6,500

Starting rate, plus compressor cost varies by model

Price guide

Is it worth repairing an AC PCB or compressor?

A PCB repair (from ₹1,500) is usually much cheaper than a new board, and worth it on most inverter ACs. A capacitor or relay fix (from ₹699) solves many ‘compressor not starting’ cases.

Compressor replacement is the costliest repair: labour, vacuum and gas start at ₹6,500, plus the compressor. It makes sense on an AC that’s less than 8 to 10 years old and otherwise in good shape. On an old, non-inverter AC, we’ll compare the cost with buying a new one so you can decide.

Prices at a glance

Simple Process

How we handle your Compressor & PCB Repair

1. Call or WhatsApp

Tell us the AC type and problem, and pick a time slot.

2. Technician visits

Our technician inspects the unit and explains the fault.

3. Approve the estimate

You see the price first, and work starts only after your OK.

4. Enjoy cool air

We test the cooling, clean up and hand over with a bill.

FAQs

Compressor & PCB Repair FAQs

Chip-level PCB repair starts at ₹1,500 for most inverter boards. If the board can’t be repaired, we quote a replacement board before going ahead.

Labour, vacuuming and gas charging start at ₹6,500. The compressor price depends on the brand, capacity and availability, and we share the full estimate first.

The most common causes are a faulty capacitor, relay or PCB, low voltage or a wiring fault. A dead compressor is less common. We test each one before deciding.

Yes, including Daikin, LG, Samsung, Voltas, Blue Star, Hitachi, Panasonic, Lloyd and Carrier.

Simple faults are fixed on site. Chip-level repairs can take longer because the board is repaired at our bench; we tell you the expected time before taking it.

Yes. Spikes and frequent power cuts can damage the PCB and capacitor. A good voltage stabiliser helps protect it.

Repairs carry a service warranty, and new compressors and boards carry the supplier’s warranty. Ask us for the exact period for your job.

The outdoor unit hums but doesn’t start, the MCB trips, there is no cooling even with a full gas charge, or there is loud knocking from the outdoor unit.

Yes, in many cases. We repair inverter PCBs at component level from ₹1,500, which usually costs much less than a new board.

The labour, vacuuming and gas charging, starting at ₹6,500. The compressor is charged separately based on brand and capacity.

Service Areas

One shop in Ulwe. All of Navi Mumbai covered.

Our technicians head out from Sector 17, Ulwe to homes, shops and offices across 18 areas of Navi Mumbai, day or night.

18areas served
24x7open every day
2003in business since

Choose your area

Need Compressor & PCB Repair today?

Call or WhatsApp +91 91370 12430. Starting from ₹1,500.